Glass & Ceramics

Clear

Our Glass & Ceramics is a water-repelling coating designed to enable smooth glass and ceramic surfaces to remain cleaner for longer. The hydrophobic and oleophobic effects allow contaminants such as grease, oil, lime, and environmental pollutants to be easily removed without applying abrasive agents or strong solvents.

SKU: N/A Category:

Looking for a way to bring back that like-new shine to many of the areas and appliances inside your home? Our Glass & Ceramics solution is a water-repelling coating designed to keep smooth glass and ceramic surfaces cleaner longer. Use throughout your home on windows, sliding glass doors, showers, tubs, sinks, smooth-top cooking surfaces and more to remove tough stains such as grease, oil, lime, and grime – without the use of harsh or abrasive chemicals! Better yet, it is super easy to apply. Simply spray on and wipe with a clean towel or cloth.

Your home isn’t the only place where our Glass & Ceramics solution can come in handy. Office windows, restrooms, and any other glass or ceramic surfaces throughout your business can benefit from a protective coating that will keep them cleaner and looking better for longer. Better yet, our coating will actually help to reduce heat and energy costs when applied to exterior windows.

Independent testing has proven that our environmentally friendly, non-toxic Glass & Ceramics solution is highly UV and weather-resistant. Before applying Glass & Ceramics, consider prepping your glass and ceramic surfaces with our Glass Cleaner to create a clean surface. This glass cleaner not only degreases, but also slightly abrades the surface, allowing for any light surface stains or watermarks to be removed.

 

  • Glass and Ceramics Coating

Uses/Features

Uses

  • Float glass

  • Architectural glass

  • Automotive glass

  • Porcelain

  • Ceramic glaze

  • Zirconia

  • Soda-lime glass

  • Photochromic glass

Features

  • Water-repellent

  • Oil-repellent

  • Strong non-stick properties

  • Easy-to-clean effect

  • Invisible to the human eye (coating thickness: 100-150 nm)

  • UV-stable

  • Abrasion-resistant

  • Resistant to temperature change

  • Breathable

  • Simple application (do-it-yourself)

  • Chemical resistant to pH < 13

  • Dries in seconds, cures in 24 hours

  • Surfaces remain cleaner for longer

DOESNO~1

Does Not Alter Appearance

ECO-FR~1

Eco-Friendly

NON-TO~1

Non-Toxic

STAYS CLEAN Stain blocker

Stays Clean

SUPER-~1

Super-Hydrophobic

Performance Testing


Coating angle analysis abrasion testing.

Glass panels were coated with Glass and Ceramic Standard, Competitor 1, and Competitor 2 were tested according to “ISO 11998:2006: Paints and varnishes – Determination of wet-scrub resistance and cleanability of coatings.” Glass and Ceramic Standard exhibited the highest contact angle initially, as well as after the abrasion resistance testing was performed.

The determination of the contact angle was determined according to “DIN 55660-2: Paints and
varnishes – Wettability – Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle” using distilled water as test liquid.

 

Contact angles were measured every 500 hours:

Coatings 0h 500h 1000h 1500h 2000h 2500h 3000h 3500h
Competitor 1 104.1 58.9 56.7 36.4 30.1 43.6 49.4 33.9
Competitor 2 106.4 81.2 61.5 52.7 38.2 33.9 33.8 30.5
Competitor 3 103.2 80.8 59.3 52.3 38.7 30.9 30.2 29.8
Glass & Ceramic Standard 110.6 103.4 101.2 94.5 93.2 84.6 82.1 75.9

Coating angle analysis for UV and weatherability testing.

 

Contact Angle Degradation Over Time Due ISO 11507:2007 Conditions
Our Glass and Ceramic Standard coating proved to be the most UV and weather-resistant coating compared to three competitive products tested according to ISO 11507:2007 exhibiting a decrease in contact angle of 34.7° as compared to Competitors 1, 2, and 3, which showed a decrease of 70.2°, 75.9°, and 73.4° respectively.

 

 

Application & Storage

  • Surface preparation: Ensure a clean, dry surface before application.
  • Application: Spray and wipe with a clean paper towel, or cloth.
  • Dry/cure time: This coating completely adheres to the surface after 24 hours. The coating will only exhibit hydrophobic property after this curing period.
  • 32 oz = Coverage: 2,045 FT² [190 M²]
  • Storage: 2-year unopened shelf life. (3°C to 30°C).

 

Surface Prep

Glass Cleaner (Optional) is a water-based cleaner for glass that utilizes aluminum oxide to create a clean surface to promote adhesion. The hydrophilic property that is present after cleaning indicates the glass is free of oils and other contaminants, ready for a nanocoating to be applied to the surface. This glass cleaner not only degreases but also slightly abrades the surface, allowing for any light surface stains or watermarks to be removed. Recommended using for surface preparation before application of Glass & Ceramics, Microporous, or the Perma-Clean Line of products. It can also be used alone as a glass cleaner.

 

FAQs

Glass & Ceramics is a non-toxic, eco-friendly, hydrophobic and oleophobic coating.

It possesses strong non-stick properties, is breathable, and ranges from 100-150 nm in thickness, rendering it completely invisible.

Glass & Ceramics can be applied onto a clean, dry surface with the simple use of a spray and a clean towel or cloth.

The coating should dry in seconds and will fully cure in 24 hours.

Glass & Ceramics can be applied to float glass, architectural glass, automotive glass, porcelain, ceramic glaze, zirconia, soda-lime glass, and photochromic glass.

By means of employing water and oil-repelling surface properties, Glass & Ceramics coating allows contaminants such as grease, oil, lime, and various environmental pollutants to be removed from smooth glass and ceramic surfaces without the application of abrasive solvents or chemical surfactants.

32 oz = Coverage: 2,045 FT² [190 M²]

Glass & Ceramics is UV-stable, abrasion-resistant, and chemically resistant to pH < 13. It is also resistant to temperature change.

Glass & Ceramics has a shelf-life of 2 years from the manufacturing date (unopened).

Must be stored at temperatures ranging between 3ºC to 30ºC.